Product Firmware Updates
The link below will navigate you to our FTP site where you can download the latest software and firmware revisions for both Blonder Tongue and RL Drake products. Please be careful to download the correct file(s) for your particular unit, as there may be more than one model version available depending on the hardware used.
The most accurate way to find the correct file(s) is by Stock Number rather than Model name. Typically Blonder Tongue uses 4 digit stock numbers with subsequent hardware revisions (if deemed a significant change) indicated by a letter at the end (####A). RL Drake products use numbers that start with 100xxxx. This is important as different firmware files are generally required between revisions. Installing the wrong files can crash the unit, requiring it to be returned to BT for repair!
Note: If the download site is offline please contact us.
Signup for Firmware Update Notifications
We will update you on major firmware notifications. You can always check our Firmware Drive to see the latest firmware for your unit.
Update Instructions (Command Line) Download (pdf)
The instructions below are intended as a general guide for older Blonder Tongue products only. Please refer to the latest product User Manual for specific instructions first and to determine if these instructions apply. Depending on the unit, either 1 or 2 files will be required for new revision changes.
NOTE: It is recommended to copy the files to the root directory of your computer ie:
My Computer > C:/
The updating procedure uses the Command Prompt application on your computer. For Windows, it can be found under Programs > Accessories > Command Prompt. All commands are case sensitive and file names must be entered exactly. The Command Prompt must be in the same folder as the EPCS file.
